iRedMail
// Document IndexThis tutorial is available in other languages. Help translate more
Attention
Check out the lightweight on-premises email archiving software developed by iRedMail team: Spider Email Archiver.
IMPORTANT NOTE: A, MX records are required, Reverse PTR, SPF,
DKIM and DMARC are optional but HIGHLY recommended.
A record for server hostnameA recordA records map a FQDN (fully qualified domain name) to an IP address. This is
usually the most often used record type in any DNS system. This is the DNS
record you should add if you want to point a domain name to a web server.
A RecordName: This will be the host for your domain which is actually a computer
within your domain. Your domain name is automatically appended to your name.
If you are trying to make a record for the system www.mydomain.com. Then all
you enter in the textbox for the name value is www.
Note: If you leave the name field blank it will default to be the record
for your base domain mydomain.com. The record for your base domain is
called the root record or apex record.
IP: The IP address of your FQDN. An IP address can be thought of as
the telephone number to your computer. It is how one computer knows how to
reach another computer. Similar to the country codes, area codes, and phone
number it is used to call someone.
TTL: The TTL (Time to Live) is the amount of time your record will stay
in cache on systems requesting your record (resolving nameservers, browsers,
etc.). The TTL is set in seconds, so 60 is one minute, 1800 is 30 minutes, etc.
Systems that have a static IP should usually have a TTL of 1800 or higher. Systems that have a dynamic IP should usually have a TTL of 1800 or less.
The lower the TTL the more often a client will need to query the name servers for your host's (record's) IP address this will result in higher query traffic for your domain name. Where as a very high TTL can cause downtime when you need to switch your IPs quickly.
Sample record:
NAME TTL TYPE DATA
www.mydomain.com. 1800 A 192.168.1.2
mail.mydomain.com. 1800 A 192.168.1.5
The end result of this record is that www.mydomain.com points to
192.168.1.2, and mail.mydomain.com points to 192.168.1.5.
PTR record or more appropriately a reverse PTR record is a process of resolving
an IP address to its associated hostname. This is the exact opposite of the
process of resolving a hostname to an IP address (A record). Example, when you ping a
name mail.mydomain.com it will get resolved to the ip address using the DNS
to something like 192.168.1.5. Reverse PTR record does the opposite; it looks
up the hostname for the given IP address. In the example above the PTR record
for IP address 192.168.1.5 will get resolved to mail.mydomain.com.
The most common use for looking up a PTR record is done by spam filters. Concept behind this idea is that fly by night spammers who send e-mails out using fake domains generally will not have the appropriate reverse PTR setup at the ISP DNS zone. This criterion is used by spam filters to detect spam. If your domain does not have an appropriate reverse PTR record setup then chances are email spam filtering software MIGHT block e-mails from your mail server.
You would most likely need to contact your ISP and make a request to create a
reverse PTR record for your mail server IP address. For example, if your mail
server hostname is mail.mydomain.com then ask your ISP to setup a reverse
PTR record 192.168.1.5 (your internet public IP address) in their reverse DNS
zone. Reverse DNS zones are handled by your ISP even though you may have your
own forward lookup DNS zone that you manage.
Mail Exchanger Record or more commonly known as MX record is an entry in the DNS server of your domain that tells other mail servers where your mail server is located. When someone sends an e-mail to a user that exists on your mail server from the internet, MX provides the location or IP address where to send that e-mail. MX record is the location of your mail server that you have provided to the outside world via the DNS.
Most mail servers generally have more than one MX record, meaning you could have more than one mail server setup to receive e-mails. Each MX record has a priority number assigned to it in the DNS. The MX record with lowest number has the highest priority and that is considered your primary MX record or your main mail server. The next lowest mx number has the next highest primary and so on. You generally have more than one mail server, one being the primary and the others as backups, only one MX for mail server is OK too.
If your ISP or domain name registrar is providing the DNS service, you can request them to set one up for you. If you manage your own DNS servers then you need to create the MX record(s) in your DNS zone yourself.
Sample MX record:
NAME PRIORITY TYPE DATA
mydomain.com. 10 mx mail.mydomain.com.
The end result of this record is, emails sent to [user]@mydomain.com will
be delivered to server mail.mydomain.com.
autoconfig/autodiscover records allow mail clients to fetch automatically the mail
client configuration of a mailbox. If the mailbox to configure is user@company.com then
it will automatically check autodiscover.company.com for the correct configuration.
More information is available here: Setup DNS records for autoconfig and autodiscover.
If your ISP or domain name registrar is providing the DNS service, you can request them to set one up for you. If you manage your own DNS servers then you need to create the autoconfig/autodiscover record(s) in your DNS zone yourself.
Sample autoconfig/autodiscover record:
NAME PRIORITY TYPE DATA
autodiscover.mydomain.com. 10 A mail.mydomain.com.
autoconfig.mydomain.com. 10 A mail.mydomain.com.
SPF is a spam and phishing fighting method which uses DNS SPF-records to define which hosts are permitted to send e-mails for a domain. For details on SPF, please check wikipedia.
This works by defining a DNS SPF-record for the e-mail domain name specifying which hosts (e-mail servers) are permitted to send e-mail from the domain name.
Other e-mail servers can lookup this record when receiving an e-mail from this domain name to verify that sending e-mail server is connecting from a permitted IP address.
SPF is a TXT type DNS record, you can list IP address(es) or MX domains in it. For example:
mydomain.com. 3600 IN TXT "v=spf1 mx -all"
This SPF record means emails sent from all servers defined in MX record of
mydomain.com are permitted to send as someone@mydomain.com.
-all means prohibit emails sent from all other servers. If it's too strict
for you, you can use ~all instead which means soft fail (uncertain).
You can specify IP address(es) directly too:
mydomain.com. 3600 IN TXT "v=spf1 mx ip4:111.111.111.222 -all"
Of course you can have them both or more in same record:
mydomain.com. 3600 IN TXT "v=spf1 mx ip4:111.111.111.111 ip4:111.111.111.222 -all"
There're more valid mechanisms available, please check wikipedia for more details.
DKIM allows an organization to take responsibility for a message in a way that can be verified by a recipient. The organization can be a direct handler of the message, such as the author's, the originating sending site's, or an intermediary's along the transit path. However, it can also be an indirect handler, such as an independent service that is providing assistance to a direct handler. DKIM defines a domain-level digital signature authentication framework for email through the use of public-key cryptography and using the domain name service as its key server technology (RFC4871). It permits verification of the signer of a message, as well as the integrity of its contents. DKIM will also provide a mechanism that permits potential email signers to publish information about their email signing practices; this will permit email receivers to make additional assessments of unsigned messages. DKIM's authentication of email identity can assist in the global control of "spam" and "phishing".
A person or organization has an "identity" -- that is, a constellation of
characteristics that distinguish them from any other identity. Associated
with this abstraction can be a label used as a reference, or "identifier".
This is the distinction between a thing and the name of the thing. DKIM uses
a domain name as an identifier, to refer to the identity of a responsible
person or organization. In DKIM, this identifier is called the Signing Domain
IDentifier (SDID) and is contained in the DKIM-Signature header fields d=
tag. Note that the same identity can have multiple identifiers.
Run command in terminal to show your DKIM keys:
Attention
amavisd-new
instead of amavisd./etc/amavisd.conf not found, please
run the command with path to its config file. For example:amavisd -c /etc/amavisd/amavisd.conf showkeys
# amavisd showkeys
dkim._domainkey.mydomain.com. 3600 TXT (
"v=DKIM1; p="
"MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDYArsr2BKbdhv9efugByf7LhaK"
"txFUt0ec5+1dWmcDv0WH0qZLFK711sibNN5LutvnaiuH+w3Kr8Ylbw8gq2j0UBok"
"FcMycUvOBd7nsYn/TUrOua3Nns+qKSJBy88IWSh2zHaGbjRYujyWSTjlPELJ0H+5"
"EV711qseo/omquskkwIDAQAB")
;. we just need strings inside the () block, it's the value of
DKIM DNS record.v=DKIM1; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDYArsr2BKbdhv9efugBy...
Note: BIND (The most widely used Name Server Software) can handle this kind of multi-line format, so you can paste it in your domain zone file directly.
Add TXT type DNS record for domain name dkim._domainkey.mydomain.com,
set value to the line you copied above: v=DKIM1; p=....
WARNING: A usual mistake is adding this DKIM record to domain name
mydomain.com, this is wrong. Please make sure you added to domain namedkim._domainkey.mydomain.com.
After you added this in DNS, verify it with dig or nslookup:
$ dig -t txt dkim._domainkey.mydomain.com
$ nslookup -type=txt dkim._domainkey.foodmall.com
Sample output:
dkim._domainkey.mydomain.com. 600 IN TXT "v=DKIM1\;p=..."
And verify it with Amavisd:
# amavisd testkeys
TESTING: dkim._domainkey.mydomain.com => pass
If it shows pass, it works.
Note: If you use DNS service provided by ISP, new DNS record might take some hours to be available.
If you want to re-generate DKIM key, or need to generate one for new mail domain, please check our another tutorial: Sign DKIM signature on outgoing emails for new mail domain.
Quote from FAQ page on dmarc.org website (it's strongly recommended to read the full FAQ page):
DMARC is a way to make it easier for email senders and receivers to determine whether or not a given message is legitimately from the sender, and what to do if it isn’t. This makes it easier to identify spam and phishing messages, and keep them out of peoples’ inboxes.
DMARC is a proposed standard that allows email senders and receivers to cooperate in sharing information about the email they send to each other. This information helps senders improve the mail authentication infrastructure so that all their mail can be authenticated. It also gives the legitimate owner of an Internet domain a way to request that illegitimate messages – spoofed spam, phishing – be put directly in the spam folder or rejected outright.
Some useful documents from https://dmarc.org:
Attention
DMARC heavily relies on SPF and DKIM records, please make sure you have correct and up to date SPF and DKIM records published.
DMARC record is a TXT type DNS record.
A simplified record looks like this:
v=DMARC1; p=none; rua=mailto:dmarc@mydomain.com
A detailed sample record looks like this:
v=DMARC1; p=reject; sp=none; adkim=s; aspf=s; rua=mailto:dmarc@mydomain.com; ruf=mailto:dmarc@mydomain.com
v=DMARC1 identifies the DMARC protocol version, currently only DMARC1 is
available, and v=DMARC1 must appear first in a DMARC record.adkim specifies alignment mode for DKIM. 2 options are available:r: relax mode (adkim=r)s: strict mode (adkim=s)aspf specifies alignment mode for SPF. 2 options are available:r: relax mode (aspf=r)s: strict mode (aspf=s)p specifies the policy for organizational domain. It tells the recipient
server what to do if received email fails DMARC mechanism check. 3 options
are available:
none (p=none): The domain owner requests no specific action be taken regarding
delivery of messages.quarantine (p=quarantine): The domain owner wishes to have email that fails the DMARC
mechanism check be treated by Mail Receivers as suspicious. Depending on
the capabilities of the Mail Receiver, this can mean "place into spam
folder", "flag as suspicious", or "quarantine toe email somewhere", maybe more.reject (p=reject): The domain owner wishes for Mail Receivers to reject
email that fails the DMARC mechanism check during the SMTP transaction.Attention
p=reject is strongly
recommended.v=DMARC1; p=reject; aspf=s; ... is ok, but not v=DMARC1; aspf=s; p=reject; ....sp specifies policy for all subdomains. This is optional. Available options
are same as p.
rua specifies a transport mechanism to deliver aggregate feedback. Currently
only mailto: is supported. This is optional.ruf specifies a transport mechanism which message-specific failure
information is to be reported. Currently only mailto: is supported. This is
optional.If you install Prosody (with iRedMail Easy platform) as Jabber/XMPP server, 2 SRV records are required.
If your mail domain name is mydomain.com and server hostname is
mail.mydomain.com, you should add 2 SRV type DNS records:
_xmpp-client._tcp.mydomain.com_xmpp-server._tcp.mydomain.comSample records:
_xmpp-client._tcp.mydomain.com 18000 IN SRV 0 5 5222 mail.mydomain.com
_xmpp-server._tcp.example.com. 18000 IN SRV 0 5 5269 mail.mydomain.com
The target domain mail.mydomain.com MUST be an existing A record, it
cannot be an IP address or a CNAME record.
This step is optional, but highly recommended.
Google Postmaster Tools web site: https://postmaster.google.com, and Postmaster Tools FAQs.
It's very simple: just register your mail domain there, and they'll give you a text record for your DNS so that they can validate the ownership of the domain.
Why use Google Postmaster Tools? Quote from Google Postmaster Tools help page:
If you send a large volume of emails to Gmail users, you can use Postmaster Tools to see:
- If users are marking your emails as spam
- Whether you’re following Gmail's best practices
- Why your emails might not be delivered
- If your emails are being sent securely
It MIGHT also help to get you out of the Junk mailbox.
If you have trouble in sending email to Gmail (or Google Apps), Google offers some information on best practices to ensure that their mail is delivered to Gmail users: Bulk Senders Guidelines.
You may also submit this form to contact Google: Bulk Sender Contact Form
Outlook Postmaster site provides some useful information for mail server administrators, if the email you sent to Outlook.com is marked as spam, please take a look: